Ford IDS 76 VMM VCM VCMII Integrated Diagnostic Software license activation production unlimited

FORD IDS v76 with Production License

The Ford Integrated Diagnostic System (IDS) will be the only equipment that provides complete diagnostic coverage of current and future Ford, Lincoln and Mercury vehicles in North America. The IDS package replaces the Worldwide Diagnostic System (WDS). The IDS application will perform the identical functions of the WDS and allows dealership technicians to diagnose and service Ford, Lincoln, Mercury vehicles. As the new diagnostic tool, IDS will be required to perform diagnostics on future model year vehicles. One IDS Package is recommended for each WDS in the dealership.

IDS is enhanced WDS software that was modified to run on a standard laptop platform, and utilizes the VCM and VMM. Moving IDS to a laptop helps technicians by integrating access to both diagnostics and service information on a single, powerful machine.

Contact for more info: special.diagnostics@mail.ru

Scania SDP3 2.9.0

More info: http://specdiag.com/scania.html

Scania SDP3 2.9.0

High Level or Industry & Marine Level

Conact: special.diagnostics@mail.ru

More info: http://specdiag.com/scania.html

CNH EST 7.1.0.0 Diagnostic Software

More info: http://specdiag.com/cnh.html

CNH Electronic Service Tool 7.1.0.0 (with Diagnostic Procedures)

Make full diagnostic and programming, troubleshoot problem, view diagnostic procedures and schematics of current brands:
 • New Holland (Agriculture and Construction);
 • CASE (Agriculture and Construction);
 • STEYR;
 • KOBELCO;
 • Iveco (Astra) (articulated dump trucks only);
 • Flexi-Coil;
 • Sumitomo (S.H.I.);
 • Link-Belt.
Supported languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch, Danish.


More info: http://specdiag.com/cnh.html

Heavy Duty ABS Tractor Trailer Diagnostic Kit Bendix ACOM Meritor Wabco Toolbox Haldex PLC ABS Diagnostics Wabash download

More info: http://specdiag.com/hd-abs-tractor-trailer.html

Heavy Duty ABS Tractor/Trailer Diagnostic Kit (Nexiq)

USB-Link Kit include:  • NEXIQ USB-Link;  • 15' USB cable;  • 405048 6-pin/9-pin vehicle "Y" Deutsch adapter;  • 421001 J560 PLC cable. Software:  • Bendix ACOM 6.4;  • Haldex PLC ABS Diagnostics 2.0;  • Meritor Wabco Toolbox 10.0.0. Heavy Duty ABS Tractor/Trailer Diagnostic Kit contains everything a technician requires to diagnose a heavy duty vehicle and trailer ABS systems.   More info: http://specdiag.com/hd-abs-tractor-trailer.html

Scania SDP3 2.4.0 2.5.0 2.6.0 2.7.0 2.8.0 2.8.1 2.9.0 download update

More info: http://specdiag.com/scania.html

Scania SDP3 2.9.0

High Level or Industry & Marine Level

Conact: special.diagnostics@mail.ru

More info: http://specdiag.com/scania.html

Scania SOPS File Editor

More info: http://specdiag.com/ssops.html

Scania SOPS File Encryptor/Decryptor v0.1

• Download with SDP3 from truck SOPS export file; • Decrypt SOPS export file to XML format; • Edit XML file with any XML editor; • Modify more than 300 parameters, like AdBlue, EGR, NOx Control, see whole list; • Encrypt XML file to SOPS import; • Upload SOPS import file to truck with SDP3; • Support Windows 2003/XP/Vista/7.

More info: http://specdiag.com/ssops.html

John Deere PLD File Editor

More info: http://specdiag.com/john-deere-pld-file-editor.html

John Deere PLD File Encryptor/Decryptor v0.1

• Decrypt PayLoad (PLD) file to txt/ini format; • Modify file expiration and other parameter data; • Encrypt PLD file; • Program controller with modified PLD with Service ADVISOR; • Support Windows 2003/XP/Vista/7.

More info: http://specdiag.com/john-deere-pld-file-editor.html

PSA Actia DiagBox 6.0 5.0 4.0 Citroen Peugeot XS Evolution Diagnostic Lexia Planet PP2000 download key keygen activation reprogram online offline

PSA Actia DiagBox 6.0

DiagBox, the electronic diagnostics solution jointly selected by the PSA Peugeot Citroën group for the Peugeot and Citroën dealer networks is being deployed from September onwards in the workshops. Its uses will include troubleshooting the new Citroën C4, all existing and future models; and of course tomorrow’s hybrid vehicles. The result of close collaboration between the PSA group, ACTIA and IBM, Diag Box is a comprehensive solution featuring a hardware platform, a communications interface and software applications. It meets the new European EuroV standard. DiagBox is set to be deployed across the 16,000 Peugeot and Citroën dealers worldwide.

Contact for more info: special.diagnostics@mail.ru

Opel Vauxhall GlobalTIS v25 v27 v30 MDI Tech2 Saab GM Chevrolet Isuzu NAO passthru full activation diagnostic software technical information download subscriber id license key keygen keymaker code download multilanguage

Opel/Vauxhall GlobalTIS v30

TIS2Web is a Technical Information System which is provided via Internet Explorer and provides assistance to both privately owned workshops and fleet customers on the technically correct repair and maintenance of Opel vehicles.

You have direct access to the extensive information provided by Opel, direct and at first hand.
The sections below give you an initial overview, a few extracts of the types of service information available and a table of the vehicles which are described in the TIS2Web System.
Hardware Requirements

We keep a wide range of data available in TIS2Web in the form of texts and graphics. To ensure that these data are transferred to you at the best possible speed, TIS2Web is hosted in a particularly high performance central server environment. However, the actual transmission rate is equally dependent on the local system environment such as e.g. the Internet connection and the Internet Service Provider.

To ensure that TIS2Web provides the best possible service and meets your expectations, we recommend the following system requirements for your PC and Internet access.

Contact for more info: special.diagnostics@mail.ru

Mitsubishi Fuso III Truck Diagnostic Software Interface MUTIII MUT3 program reprogram edition speed limit EOL max torque

More info: http://specdiag.com/mb.html

Mitsubishi Fuso III Diagnostic Kit (SD C3)

Mitsubishi Fuso III Diagnostic Kit:  • Star Diagnosis Compact 3 Multiplexer (very good quality);  • RS232 to RS485 cable;  • OBD2 cable;  • 38-pin cable;  • 14-pin cable;  • 4-pin cable;  • Pre-installed HDD with software for any laptop. Software:  • Mercedes-Benz DAS/Xentry 2011/7 (Diagnosis Assistance System) (Developer); EOL module enabled to program sped limit and max torque. Mitsubishi Fuso trucks supported.

download Toyota TIS TechStream 6.20 Lexus Scion subscription Cardaq plus diagnostic mongoose passthru key keygen activation Europe Japan Norht America Other

Toyota TIS TechStream 6.20

 TIS techstream is the replacement for the Diagnostic Tester. It combines the functionality of TIS and the scantool into a single portable device. With TIS techstream, technicians can simultaneously view/analyze on-board vehicle data, browse relevant TIS service documents, and reprogram vehicles all from the driver's seat via wireless connection to TIS.

Scantool Diagnostics
TIS techstream offers full support for 1989 – current vehicles marketed in North America. Periodic software updates will be available to support new models. TIS techstream provides quick and easy access to all available systems on the vehicle as well as a one touch vehicle status report (Health Check).

Vehicle Reprogramming
Toyota/Scion/Lexus ECMs can be reprogrammed using the TIS techstream scantool. TIS techstream software version requirements are specified in applicable Technical Service Bulletins (TSBs), which can be accessed with a subscription to this website. Older documents may state to use the Diagnostic Tester as being the required tool. TIS techstream is the replacement for the Diagnostic Tester and can be used for all Toyota/Scion/Lexus vehicles marketed in North America.

 - Europe subscription activated
 - North America subscription activated
- Japan subscription activated
- Other subscription activated

Contact for more info: special.diagnostics@mail.ru

Paccar ESA Electronic Service Analyst Truck Diagnostic Tool Kenworth Peterbilt download activation keygen key renewal code Nexiq

More info: http://specdiag.com/paccar.html

USB-Link Kit include:
 • NEXIQ USB-Link;
 • 15' USB cable;
 • 405048 6-pin/9-pin vehicle "Y" Deutsch adapter.

Software:
 • Paccar Electronic Service Analyst (ESA) 3.7.0.415 [2011].

Electronic Service Analyst is a diagnostic tool what communicates over a Data Link Adapter to the NAMUX components. Can connect to Kenworth, Peterbilt and other trucks with Paccar engines.

Features:
 • Detect fault codes in the components.
 • Verify and troubleshoot new electronic instrumentation functionality.
 • Flash the control unit.
 • Program parameters and diagnose the root cause of the problems.

More info: http://specdiag.com/paccar.html

Iveco AlphaNumeric Code Calculator for E.A.S.Y Elctrac ECI remove speed limit and immobiliser EOL

Iveco AlphaNumeric Code Calculator v0.1

• Put Current Configuration (alphanumeric) code and decode it; • Modify speed limit, immobiliser and other parameters data; • Encode modifications to New Configuration and make changes with EASY software; • Support Windows 2003/XP/Vista/7.

CAT Lift Trucks The Diagnozer Diagnostic cable and software Asia, China, Japan, america and Europe market Developer Mode Level 3

More info: http://specdiag.com/cat-lift-trucks-diagnozer.html

CAT Lift Trucks Diagnostic Kit (16A68-11320)

CAT Lift Trucks Diagnostic Kit include:  • 16A68-11320 GSE 12-pin cable. Software:  • CAT Lift Trucks - The Diagnozer 3.20 (Developer Mode - Level 3). The Diagnozer application is a service tool for each type of controllers installed in forklifts. It monitors I/O values and failures, and sets various parameters. Features:  • Protection function.  • Multilanguage support function.  • Model selection function.  • I/O value monitoring function.  • Failure monitoring function.  • Failure history monitoring function.  • Setup value monitoring and change function.  • I/O value graph display function.  • Active test function.  • Firmware update function.  • Screen print function. Click here to view supported models. Supported languages: English, French, German, Spanish, Italian, Japanese, Russian, Dutch, Swedish, Portuguese, Chinese.

John Deere Diagnostic Tool for Tractor EDL v2 Service ADVISOR 4.0 2011 2012

   
 
John Deere Diagnostic Kit include:
 • Electronic Data Link v2;
 • 15' USB cable;
 • W1 9-pin Deutsch adapter.

Software:
 • John Deere Service ADVISOR 4.0 [2011] AG (Agriculture).

With Service ADVISOR you can view service manuals, use DTAC (Dealer Technical Assistance Center) data, make diagnostics, readings, tests and calibrations, re-program controllers.
Supported languages: English, French, German, Italian, Portuguese, Russian, Spanish.

DAF Davie XDc II 5.5.2 Runtime VCI-560 MUX download truck diagnostic tool license activation

More info: http://specdiag.com/daf.html


DAF Davie XDc II 5.5.2

With this kit you can diagnose, troubleshoot and program:
 • CAB climate system.
 • Safety system.
 • Security system.
 • Transmission system.
 • Vehicle control system.
 • Door control system.
 • Instrumentation system.
 • Engine system.
 • Tachograph.
 • Communication system.
 • After treatment system.
 • Break system.

Supported languages: English, German, Dutch, Danish, Czech, French, Italian,
Finnish, Hungarian, German, Spanish, Norwegian, Russian, Greek, Polish, Turkish.

Hino Diagnostic eXplorer and Reprogram Manager 3.0 download license Fleets Diagnostic Truck Tool

More info: http://specdiag.com/hino.html 

Hino Diagnostic eXplorer and Reprogram Manager 3.0
 
 • Acquire and delete trouble data;
 • Link diagnostic trouble codes read from the ECU to corresponding diagnostic work flow sequences and directly view the required data;
 • Obtain sensor conditions from the vehicle when trouble occurs;
 • Monitor the sensors and actuators equipped on the engine and test the operation of solenoid valves by forcefully operating them;
 • Simulate diagnostic work with only a PC;
 • Automatically save fetched ECU data and analyze trouble based on the saved data even when the cause of trouble cannot be grasped;
 • Reprogram the ECU’s program which is compatible with the reprogramming software.



More info: http://specdiag.com/hino.html

Scania SDP3 2.8.0 (Diagnos & Program) download Scania Multi 2011 2012

Scania SDP3 2.8.0 (Diagnos & Program) High or Internal level , Industry & Marine
Scania Multi 2011 spare parts

Used for Scania R,P,G,T,K,N series (buses, trucks) over 2004 year.
Supported languages: English, German, Spanish, French, Japanese, Dutch, Polish,
Portuguese, Swedish, Norwegian, Suomi, Turkish, Italian, Czech, Russian, Chinese.



More info: http://specdiag.com/scania.html
More info: http://specdiag.com/scania.html
More info: http://specdiag.com/scania.html

317-7484 Caterpillar Communication Adapter III 3 ORINAL buy BEST price

More info: http://www.specdiag.com/cat.html
                  http://specdiag.com/cat-ca3.html 
                  http://www.specdiag.com/catfp.html

Caterpillar Diagnostic Kit include:
 • 317-7484 Communication Adapter III;
 • 327-8981 (9-pin cable);
 • USB cable.

Software:
 • Caterpillar Electronic Technician v1.0 2011B (Flash Factory Subscription);
 • Caterpillar Flash Files DVDs (to re-flash ECMs).
 • 100% Caterpillar ET Factory Passwords Generator v0.2.1


With this kit you can communicate with the ECMs through a communication data link, allowing existing and potential problems to be diagnosed, products to be configured, and data to be obtained for analysis.
With this service tool users, can:
 • View active and logged diagnostics.
 • View events where irregularities occurred and were logged by the ECM.
 • View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
 • Record and log performance data.
 • Graph a group of status parameters.
 • View the current configuration of an ECM.
 • Change ECM configurations.
 • View the current configuration of an ECM.
 • Change ECM configurations.
 • Perform diagnostic tests.
 • Perform calibrations.
 • Print reports and diagnostic results.
For some machine and engine products, additional functionality has been included with the service tool program. For programming protected parameters use Factory Passwords Generator software.

More info: http://www.specdiag.com/cat.html
                  http://specdiag.com/cat-ca3.html 
                  http://www.specdiag.com/catfp.html

Volvo 88890020 VCI Buy BEST PRICE ON NET purchase get ORIGINAL interface

More info: http://www.specdiag.com/volvo.html
                  http://specdiag.com/volvo-88890020.html 

Volvo Diagnostic Kit:
 - 88890020 interface
 - 88890026 OBD2 cable
 - Volvo Premium Tech Tool (PTT) 1.12 / VCADS Pro 2.40 (Development)

 - Volvo Developer Tool (dev2tool): http://www.specdiag.com/vdt.html
 - Volvo Matris 2010/2
 - 9998960 (cable for early v2 buses)
 - 88890018 (cable for latest buses/coaches with AdBlue)
 - 88890027 (8-pin cable for European trucks)
 - 88890034 (9-pin cable for North American trucks)
 - 85111614 (9-pin to 6-pin converter for North American trucks)
 - 9993832 (14-pin cable for construction equipment)

More info: http://www.specdiag.com/volvo.html
                  http://specdiag.com/volvo-88890020.html 

Scania SOPS File Editor Encryptor Decryptor

 SCANIA SOPS FILE EDITOR - ENCRYPTOR - DECRYPTOR

More info: http://www.specdiag.com/ssops.html

• Download with SDP3 VCI2 from truck SOPS file;
• Decrypt SOPS file to XML format;
• Edit XML file;
• Modify more than 300 parameters, like AdBlue, EGR, NOx Control;
• Encrypt modified XML file to SOPS;
• Upload SOPS file to truck with SDP3 VCI2;
• Support Windows 2003/XP/Vista/7.

Freightliner ServiceLink 4.7.0 download truck diagnostic repair program manuals service parts workshop

Freightliner Diagnostic Kit (Nexiq)

USB-Link Kit include:  • NEXIQ USB-Link;  • 15' USB cable;  • 405048 6-pin/9-pin vehicle "Y" Deutsch adapter. Software:  • Freightliner ServiceLink 4.7.0. ServiceLink is a diagnostic and service tool that communicates with the various Electronic Control Units (ECUs) on Daimler Trucks North America LLC (DTNA) vehicles. Supports diagnostics and parameterization for Freightliner newest class 8 vehicle. Features:  • Supports the Controller Area Network (CAN) protocol for the Cascadia ECUs.  • Nexiq USB-Link adapter will handle all protocols, including the new CAN protocol.  • Supports four new ECUs for the Cascadia model, including:    - Signal detect and Actuation Module (SAM) Cab;    - SAM Chassis;    - Modular Switch Field (MSF);    - Central Gateway.  • Supports the following CAN ECUs functions:    - View faults and clear faults;    - Upgrading ECU software (Flashing);    - Parameters (except for the Central Gateway);    - MSF Switches.  • Provides updated Templates, including new templates that support the CAN ECUs.  • Provides a new enhanced templates toolbar.  • Provides enhanced ECU List information and VIN reporting, including new Conflicting VIN dialog box. More info: http://specdiag.com/freightliner.html

International Navistar Nexiq ServiceMaxx v429 activation key keygen serial id truck diagnostic

More info: http://www.specdiag.com/int.html

International Diagnostic Kit:
 - Nexiq USB-Link
 - 6/9-pin cable
 - International MD32, SA
 - International ServiceMaxx v429
 - International DLB (Diamond Logic Builder)
 - International IPC, ABS

More info: http://www.specdiag.com/int.html

Iveco Eltrac EASY E.A.S.Y. ECI 5.1 6.1 7.1 8.0 speed limit remove adblue remove alphanumeric code Euro Daily activation keygen download code number

More info: http://www.specdiag.com/iveco.html

Iveco Diagnostic Kit:
 - Eltrac Communication Interface (ECI) with cables
 - Iveco EASY 8.0.0 (activation of all products)

More info: http://www.specdiag.com/iveco.html

Detroit Diesel Calibration Tool - DDCT 4.5 download ECM calibration DDEC I II III IV V VI

 Detroit Diesel Calibration Tool - DDCT 4.5

• View and edit the control parameters in the ECM to optimize the control logic;
 • View instrumentation variables, such as rpm or fluid temperatures and pressures;
 • Use meta files (.MET), use and edit calibration files (.CAL).

More info: http://specdiag.com/detroit.html

Cummins Calterm III 3.41 Meta files ECM calibration software download level

Cummins Calterm III 3.41

More info: http://specdiag.com/cummins.html

MTU DiaSys 2.40 2.50 2.55 Diesel Engine Generator Power Energy marine rail mining

More info: http://specdiag.com/mtu.html

 

MTU Diagnostic Kit include:
 • IXXAT USB-to-CAN Compact;
 • Other diagnostic cables;

Software:
 • MTU DiaSys 2.55.

DiaSys program is used to communicate with various MTU controllers, RCS-5 Remote Control Systems and MCS-5 Monitoring and Control Systems.
The main features of the program:
 • Data exchange with the central database;
 • Controller parameter setting;
 • Data recording.
Supported languages: German, English.

More info: http://specdiag.com/mtu.html

Cummins InPower 8.0 8.2 8.5 Genset | ONAN | Power Generation Energy Electric key keygen activation authorization

 More info: http://specdiag.com/cummins-inpower.html

Cummins Genset Diagnostic Kit include:
 • DB9F to DB9F (null) cable connects to:
   - PowerCommand© control in genset;
   - Automatic transfer switch applications.

Software:
 • Cummins InPower Pro 8.5 (with INCAL).

This diagnostic tool provides electronic service functions including:
 • Adjustments for trims and settings;
 • Monitoring;
 • Strip chart;
 • Viewing faults;
 • Report capability.
This tool also can be used to save device's trims and settings to a file. The stored settings can be viewed offline and they can be used to configure multiple installations of the same application controller type.

More info: http://specdiag.com/cummins-inpower.html

Scania Marine & Industry Diagnostic Tool Engine trouble codes repair manual service download

More info: http://www.specdiag.com/scania-vci2-marine.html

Scania Marine Diagnostic Kit include:
 • VCI-2 (good quality copy);
 • 1862924 (cable to connect VCI-2 to marine engine).

Software:
 • Scania SDP3 (Diagnos & Programmer) 2.8.0 with USB key.

Used for Scania industrial and marine engines.

Scania Truck & Bus Diagnostic Tool VCI1 VCI2 parts service workshop repair manuals

 More info: http://www.specdiag.com/scania.html

Scania Diagnostic Kit VCI1:
 - VCI1 with cables
 - Scania SD2 & SP2 2.3

Scania Diagnostic Kit VCI2:
 - VCI2 with cables
 - Scania SDP3 2.7.0 (never expire, High level)
 - USB key

Scania SOPS File Editor: http://www.specdiag.com/ssops.html

More info: http://www.specdiag.com/scania.html

JCB Service Parts Pro 1.14 2011 spare parts electronic parts catalogue download 1.12 1.13 2009 2010

JCB Service Parts Pro 1.14

 

More info: http://www.specdiag.com/jcb.html

Isuzu Truck Diagnostic repair service manuals wiring diagrams system 2011 2012 models

More info: http://www.specdiag.com/isuzu.html


Isuzu Truck Diagnostic Kit

USB-Link Kit include:
 • NEXIQ USB-Link;
 • 15' USB cable;
 • 405048 6-pin/9-pin vehicle "Y" Deutsch adapter;
 • 444009/448013 OBD2 adapter.

Software:
 • Isuzu Diagnostic Service System (IDSS) 4.2 with latest updates

More info: http://www.specdiag.com/isuzu.html

Caterpillar Diagnostic repair service manuals wiring diagrams system

More info: http://www.specdiag.com/cat.html
                  http://specdiag.com/cat-ca3.html

Caterpillar Diagnotic Kit:
 - Caterpillar Communication Adapter 3 (CA3)
 - 9-pin cable
 - CAT Electronic Technician 2011B
 - CAT Service Information System 2011B
 - CAT Flash Files DVDs


More info: http://www.specdiag.com/cat.html
                  http://specdiag.com/cat-ca3.html

John Deere Diagnostic repair service manuals wiring diagrams system

More info: http://www.specdiag.com/john-deere.html

John Deere Diagnostic Kit:
  - Electronic Data Link v2 (EDLv2)
  -  (W1 9-pin cable)

  - John Deere ServiceAdvisor 4.0 2011 AG DVDs
  - John Deere ServiceAdvisor 4.0 2011 CCE DVDs
  - John Deere PLD File ED v0.1 (PayLoad filed editor)
  - (W2 cable required for cables W3, W4, W5, W6) 
  - (W3 cable for 6125 engines with Lucas ECU)
  - (W4 cable for 7000, 8000, 9000 series tractors)
  - (W5 cable for 6000 series tractors) 
  - (W6 cable for 8000 tractors with JD ECU)
  - DS10022 (cable for AccuDepth, future implement communication buses, tractors with no GreenStar harness)

More info: http://www.specdiag.com/john-deere.html

Iveco Truck Diagnostic repair service manuals wiring diagrams system

More info: http://www.specdiag.com/iveco.html

Iveco Diagnostic Kit:
 - Eltrac Communication Interface (ECI) with cables
 - Iveco EASY 7.1.4 (activation of all products)

More info: http://www.specdiag.com/iveco.html

Renault Truck diagnostic DCI DXI LCV equipment repair service manuals wiring diagrams system

More info: http://www.specdiag.com/renault.html

More info: http://www.specdiag.com/renault.html

Renault NG10 Diagnostic Kit:
 - 88840133 VCI
 - OBD2 cable
 - BNA 12-pin cable
 - Laptop (Lenovo G550)
 - Diag NG10 (Diagnostica+ 1.05, LCV Diagnostics 1.75, Teach Me 1.05) & RTT 1.12 (Development)

More info: http://www.specdiag.com/renault.html

Volvo Construction Diagnostic Truck Tech Tool VCADS interface adapter repair service manuals wiring diagrams system

More info: http://www.specdiag.com/volvo.html
                  http://specdiag.com/volvo-88890020.html 

Volvo Construction Diagnostic Kit:
 - 88890020 interface
 - 88890026 OBD2 cable
 - Volvo Premium Tech Tool (PTT) 1.12 / VCADS Pro 2.40 (Development)
 - Volvo Developer Tool (dev2tool): http://www.specdiag.com/vdt.html
 - Volvo Matris 2010/2
 - 88890027 (8-pin cable for European trucks)

 - 9993832 (14-pin cable for construction equipment)

More info: http://www.specdiag.com/volvo.html
                  http://specdiag.com/volvo-88890020.html 

Allison DOC For PC Service Tool 9.0 9.1 Transmission Diagnostic Kit activation key keygen password serial license reprogramming reprogram TAC engineering

More info: http://www.specdiag.com/allison.html

Allison Diagnostic Kit (Nexiq)

USB-Link Kit include:
 • NEXIQ USB-Link;
 • 15' USB cable;
 • 405048 6-pin/9-pin vehicle "Y" Deutsch adapter.

Software:
 • Allison DOC® For PC - Service Tool 9.1;
 • Allison DOC® For PC (AED) 3.1.

The Allison DOC® (Diagnostic Optimized Connection) For PC – Service Tool is a diagnostic system designed for use with Allison’s 3000/4000 Product Families transmissions, 1000/2000 Product Families transmissions, and transmissions using CEC3/CEC2/CEC1 controls. This PC based diagnostic program is capable of communicating with Allison 4th Generation Control System Module TCMs (1000/2000, 3000/4000, and CEC3), WTEC II and WTEC III Electronic Control Units (ECU), 1000/2000 (Allison Pre-4th Generation Controls) TCMs, CEC2, and CEC1 Electronic Control Units (ECU).

Features:
 • Monitors 3000/4000 Product Families Transmission Control Module (TCM) data.
 • Monitors 1000/2000 Product Families Transmission Control Module (TCM) data.
 • Monitors CEC/CEC2/CEC3 Electronic Control Unit (ECU) data.
 • Displays multiple transmission parameters.
 • Reads engine faults.
 • Displays a graphical instrument panel with analog and digital gauges.
 • Displays a graphical strip chart.
 • Records and plays back diagnostic sessions.
 • Prints diagnostic reports.
 • Reprograms selected TCM parameters.
 • Security measures to control reprogramming TCM/ECU parameters.
 • Integrated Help with training videos.
 • DTC information with a direct link to 3000/4000 Troubleshooting Manuals.
 • DTC information with a direct link to the 1000/2000 Troubleshooting Manuals.
 • DTC information with a direct link to CEC 2 Troubleshooting Manuals.
 • A demo mode using prerecorded data.
 • SmartConnect for detecting the PC-to-vehicle translation device and communication link.
 • Compliant with applicable TMC Recommended Practices, SAE and CE Standards.
 • RP1210A compliant.
 • Reprogramming and engineering TAC data enabled.
 • Communication troubleshooting wizard for those cases where the tool is unable to connect to a control module.

More info: http://www.specdiag.com/allison.html