Meritor Wabco Toolbox 11.0

Meritor Wabco Toolbox 11.0

Meritor WABCO Toolbox is a personal computer diagnostics program. The Toolbox Software provides PC diagnostic capabilities for Meritor WABCO Vehicle Control Systems. The program provides three basic functions:
 • Displays both constant (e.g., ECU number) and changing (e.g., RPMs) information from the system under test.
 • Displays both the active and stored system faults, as well as the appropriate repair instructions.
 • Activates system components to verify system integrity, proper component operation and installation wiring.

MORE INFO:

http://specdiag.com/hd-abs-tractor-trailer.html

http://specdiag.com/dgtech-dpa5.html

http://specdiag.com/nexiq-usb-link.html

download CNH EST 7.7.0.0

CNH EST 7.7.0.0

Electronic Service Tool (EST) - used by dealership technicians to connect with machines that have a Controller Area Network (CAN) BUS as part of the electronic system architecture.

With this service tool you can:

 • Check status of parameters;
 • Retrieve faults;
 • Run diagnostic tests;
 • Make ECU and parameter programming;
 • Monitor active and logged diagnostics;
 • View and change ECU configuration;
 • View diagnostic procedures and schematics.
 • Troubleshoot problems;
 • Use asist database;
 • Run scope diagnostics;

E.A.S.y - additional engine diagnostic and download tool for connection directly to ECU to perform diagnostic, programming and ECU reload by K-Line protocol.
CNH Engine Download Tool operates from within the EST program to perform the following engine download operations:

 • Provide Engine Control Unit (ECU) programing update capability;
 • Provide blank ECU initialization and programming capability;
 • Provide ECU programming reassignment for blank and other ECUs;
 • Provide ECU download crash recovery.

See our Approval Password Generator to program Blank ECU, ECU Reassignment and Download Crash Recovery.

Supported brands:

 • New Holland (Agriculture and Construction);
 • New Holland FK (Fiat-Kobelco);
 • New Holland O&K (Orenstein & Koppel);
 • CASE (Agriculture and Construction);
 • STEYR;
 • KOBELCO;
 • Iveco (Astra) (articulated dump trucks only);
 • Flexi-Coil;
 • Sumitomo (S.H.I.);
 • Link-Belt.

Supported languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch, Danish.

MORE INFO:
http://specdiag.com/cnh.html
http://specdiag.com/cnh.html
http://specdiag.com/cnh.html

DENSO DIAGNOSTIC KIT (PYTHON)

DENSO DIAGNOSTIC KIT (PYTHON)

http://specdiag.com/denso.html

INCLUDED  • Python interface  • USB cable  • OBD2 cable  • Denso DST-PC 7.1.1 [2013] DESCRIPTION Diagnostic System Tester (DST) - communicates with multiple vehicle ECU’s by conventional serial communication as well as the modern CAN bus protocol. With new features like Automatic Vehicle Detection, Data Recording and Trouble Shooting Guidance, the DST-PC platform offers all of the diagnostic information needed for advanced trouble shooting. The DST unique design makes it simple to expand and update to support new management systems and vehicles. High-Tech Features:  • Clear Trouble Codes.  • Data Recording.  • Extensive Data Monitoring and simultaneous Active Tests.  • Active Tests.  • Manage Projects.  • Injector Compensation.  • Vehicle ECU Memory Reset.  • Injection Quantity Correction.  • MAF Correction.  • Fuel Pump Learning Value Clearing.

MAN T200 + Panasonic CF-28 SALE!

MAN DIAGNOSTIC KIT (T200) + Panasonic ToughBook CF-28 only 2099 EUR!

 

 • T200 communication interface
 • Panasonic Toughbook CF-28
 • OBD2 cable
 • 12-pin round cable
 • Network cable
 • MAN-cats II 12.01 [2013] (Development level)
 • MANTIS [2013] (spare parts)
 • MANWIS [2013] (workshop and repair manuals)

MORE INFO:
http://specdiag.com/man.html
http://specdiag.com/man.html
http://specdiag.com/man.html

Scania SDP3 2.17 update

Scania SDP3 2.17.0

Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. The program is used for troubleshooting, adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units.

More info: http://www.specdiag.com/scania-vci2.html
More info: http://www.specdiag.com/scania-vci2.html
More info: http://www.specdiag.com/scania-vci2.html

MTU DiaSys 2.60 SP1 update

MTU DiaSys 2.60

DiaSys used to communicate with various MTU controllers, RCS-5 Remote Control Systems and MCS-5 Monitoring and Control Systems.

The main features of the program:
 • Data exchange with the central database;
 • Controller parameter setting;
 • Data recording.

Supported languages: German, English.

More info: http://www.specdiag.com/mtu.html

More info: http://www.specdiag.com/mtu.html 

More info: http://www.specdiag.com/mtu.html

Scania SDP3 2.16 update

Scania SDP3 2.16.0

Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. The program is used for troubleshooting, adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units.

More info: http://www.specdiag.com/scania-vci2.html
More info: http://www.specdiag.com/scania-vci2.html
More info: http://www.specdiag.com/scania-vci2.html

Cummins InPower Pro 9.5 download

Cummins InPower Pro 9.5

More info: http://specdiag.com/cummins.html

More info: http://specdiag.com/cummins.html

More info: http://specdiag.com/cummins.html

InPower™ is a PC-based service and maintenance tool that is designed to optimize service and maintenance activities associated with Cummins PowerCommand® products. InPower software links a personal computer to microprocessor-based PowerCommand Controls either locally or remotely, allowing users to perform a wide variety of adjustments, tests and maintenance activities. InPower uses the widely understood and powerful Windows® Explorer format to provide easy access to the software’s many functions. The software also has function key access to commonly used commands such as connect/disconnect, save, strip chart and monitor functions, and exit commands. InPower is a powerful tool for use in optimizing service and maintenance activities. It allows easy access to dozens of set up and adjustments in Cummins microprocessor-based controls. Because of the comprehensive access it provides, Cummins recommends that users attend a training class to familiarize themselves with control and operation of the tool and how it can impact the operation of their equipment. Inappropriate set up and adjustments can result in mis-operation of the equipment it connects to.

Landini McCORMICK AGCO Perkins DIAGNOSTIC KIT (CA3)

PERKINS DIAGNOSTIC KIT (CA3)

http://www.specdiag.com/perkins.html

INCLUDED  • 317-7484 Communication Adapter III  • 327-8981 (9-pin cable for Machinery)  • USB cable  • Olympian Electronic Service Tool (EST) v1.0 2011B  • Perkins Electronic Service Tool (EST) v1.0 2013A  • Perkins EDi 3.0 (old engine and genset diagnostic) DESCRIPTION With this kit you can communicate with the ECMs through a communication data link, allowing existing and potential problems to be diagnosed, products to be configured, and data to be obtained for analysis. With this service tool users can:  • View active and logged diagnostics.  • View events where irregularities occurred and were logged by the ECM.  • View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.  • Record and log performance data.  • Graph a group of status parameters.  • View the current configuration of an ECM.  • Change ECM configurations.  • Perform diagnostic tests.  • Perform calibrations.  • Print reports and diagnostic results. For some machine and engine products, additional functionality has been included with the service tool program. For programming protected parameters see Factory Passwords Generator software.

Download Perkins EST 2013A

Perkins EST 2013A

With this service tool users can:

 • View active and logged diagnostics.
 • View events where irregularities occurred and were logged by the ECM.
 • View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
 • Record and log performance data.
 • Graph a group of status parameters.
 • View the current configuration of an ECM.
 • Change ECM configurations.
 • Perform diagnostic tests.
 • Perform calibrations.
 • Print reports and diagnostic results.

More info: http://www.specdiag.com/perkins.html

Download Iveco E.A.Sy EASY 9.1 [2013]

E.A.SY (Electronic Advanced System) - allows simple diagnosis of the various electronic control units on the vehicle, using a communications module (ECI). E.A.SY. software interface is designed to facilitate access to tools, view functions and make diagnostic procedures clear and adaptable to various needs. The software for the E.A.SY platform provides a single, intuitive interface, through which it is possible to consult a guide to repairs organised by symptom.

With this service tool you can:

 • Make active ECU diagnostic;
 • Make parameter programming;
 • Perform engine tests;
 • View wiring diagrams.


More info: http://www.specdiag.com/iveco.html

ZF DIAGNOSTIC KIT (IXXAT DPA 05)

ZF DIAGNOSTIC KIT (DPA05)

http://www.specdiag.com/zf.html

INCLUDED  • DPA05 Interface  • USB cable  • RS232 cable  • 9-pin cable  • 9/6/3-pin cable  • ZF-Testman Pro Development 10.5 DESCRIPTION ZF-Testman Pro checks the functionality of all electronically controlled ZF products. All transmission-specific data required for a fast and comprehensive diagnosis are retrievable by the ZF diagnosis system Testman. Supported commercial vehicle/special transmissions:  • ASTRONIC (ASTRONIC 1, ASTRONIC 2, ASTRONIC Mid, ASTRONIC Lite)  • ECOMAT (ECOMAT 1, ECOMAT 2/4, HP 260 CAN Converter)  • INTRADER (INTRADER EST32, INTRADER EST42/48)  • AVS  • E-TRONIC  • WSK EST 41/61 Supported commercial vehicle steering systems:  • ZF Servocom RAS-EC (RAS-EC ISO, RAS-EC KWP)  • ZF Servocomtronic (Servotronic F) Supported automobile car steering systems:  • EHPS (BMW R50, OPEL EP2)  • ZF Servolectric (BMW E85, APA E72, APA E90, VW PQ35/45 + Audi TT, VW PQ35-3)  • ZF Active Steering (BMW E60 PL1, E70 PL4, E90 PL2)  • ZF Servotronic (Servotronic F) Supported off-road driveline technology and asle systems:  • ERGOPOWER (WG110-WG311, 2-3 WG-94, EST 117/125 - 119/126)  • T7000 (T7100 EST38, T7200 EST38, T7300 EST38, T7000 EST45/57/57A)  • ECCOM (John Deere, Claas)  • T557 EST57A  • HC 85 Diagnose:  • Current errors;  • Read error memory;  • Delete error memory;  • Read identification block;  • Vehicle data sheet; Test Inputs and Outputs:  • System-check standstill;  • System-check run;  • Test unit (indication of all digital inputs and outputs);  • Indication of all digital and analog values such as speeds, currents and voltages; Repair support:  • Tightening torques;  • Setting data;  • Special tools;  • Test equipment;  • Maintenance;  • Repair work;  • Pressures;  • Circuit diagrams;  • Electrical readouts;  • PDF format; Vehicle configuration - depending on product all vehicle specific data can be stored or shift programs selected and adjusted.

Download Hino Diagnostic eXplorer & Reprog Manager 3.1.2 [2013]

 Hino Hino Diagnostic eXplorer & Reprog Manager 3.1.2 [2013]

 • Acquire and delete trouble data;
 • Link diagnostic trouble codes read from the ECU to corresponding diagnostic work flow sequences and directly view the required data;
 • Obtain sensor conditions from the vehicle when trouble occurs;
 • Monitor the sensors and actuators equipped on the engine and test the operation of solenoid valves by forcefully operating them;
 • Simulate diagnostic work with only a PC;
 • Automatically save fetched ECU data and analyze trouble based on the saved data even when the cause of trouble cannot be grasped;
 • Reprogram the ECU’s program which is compatible with the reprogramming software.

More info: http://www.specdiag.com/hino.html

CLAAS DIAGNOSTIC KIT (CANUSB)

CLAAS DIAGNOSTIC KIT (CANUSB)

http://www.specdiag.com/claas.html

INCLUDED  • CANUSB Interface  • OBD2 cable  • CLAAS CDS 6.0.8  • CLAAS MetaDiag© 2007 (Update 2013) DESCRIPTION MetaDiag© 2007 - electronic diagnostic system used by service technicians to obtain information regarding possible faults and quickly identify defects. Supported models: 1X0-94, Ares, Arion, Atles, Axion, Axos, Celtis, Ceres, Cergos, Dionis, Ergos, Ergos 4x6, Fructus, Gamme T, Nectis, Pales, RB, Temis. Supported languages: English, German, Danish, Greek, French, Italian, Dutch, Portuguese, Russian, Spanish. CDS (CLAAS Diagnostic System) - allow defects to be identified quickly and the on-board management system to be configured and updated. Supported models: Mega-Medion N, Jaguar, Wuantum. Supported languages: English, German, French, Spanish, Bulgarian, Swedish, Russian, Romanian, Portutuese, Polish, Dutch, Italian, Hungarian, Croatian, Finnish, Danish, Czech.

Download CNH EST 7.5

CNH EST 7.5

Electronic Service Tool (EST) - used by dealership technicians to connect with machines that have a Controller Area Network (CAN) BUS as part of the electronic system architecture.

With this service tool you can:

 • Check status of parameters;
 • Retrieve faults;
 • Run diagnostic tests;
 • Make ECU and parameter programming;
 • Monitor active and logged diagnostics;
 • View and change ECU configuration;
 • View diagnostic procedures and schematics.
 • Troubleshoot problems;
 • Use asist database;
 • Run scope diagnostics;

E.A.S.y - additional engine diagnostic and download tool for connection directly to ECU to perform diagnostic, programming and ECU reload by K-Line protocol.
CNH Engine Download Tool operates from within the EST program to perform the following engine download operations:

 • Provide Engine Control Unit (ECU) programing update capability;
 • Provide blank ECU initialization and programming capability;
 • Provide ECU programming reassignment for blank and other ECUs;
 • Provide ECU download crash recovery.

More info: http://www.specdiag.com/cnh.html

Download Scania SDP3 2.14

Scania SDP3 (Diagnos & Programmer) 2.14.0 [1302]

cania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. The program is used for troubleshooting, adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units.

Our provided USB key contains 3 Levels:
High Level used for Scania R,P,G,T,K,N series (buses, trucks) over 2004 year.
Industry & Marine Level used for industrial and marine engines.
Internal Level for developers used for Scania R,P,G,T,K,N series (buses, trucks) over 2004 year.

http://specdiag.com/scania-vci2.html

Download Scania SDP3 2.13

Scania SDP3 (Diagnos & Programmer) 2.13.0 [1211]

cania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. The program is used for troubleshooting, adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units.

Our provided USB key contains 3 Levels:
High Level used for Scania R,P,G,T,K,N series (buses, trucks) over 2004 year.
Industry & Marine Level used for industrial and marine engines.
Internal Level for developers used for Scania R,P,G,T,K,N series (buses, trucks) over 2004 year.

http://specdiag.com/scania-vci2.html

MAN-cats II 12.01 [2013] T200

MAN DIAGNOSTIC KIT (T200)

http://specdiag.com/man.html    http://specdiag.com/man.html

INCLUDED  • T200 communication interface  • Panasonic Toughbook CF-51*  • OBD2 cable  • 12-pin round cable  • Network cable  • MAN-cats II 12.01 2013 (Development level)  • MANTIS 2013 (spare parts)  • MANWIS 2012 (workshop and repair manuals) DESCRIPTION MAN-cats II is an external diagnosis system with the most extensive test depth for electrical systems in MAN commercial vehicles. This Dealer Level diagnosis system is ideally suited to use in a workshop as well as mobile usage. Examples of diagnosable systems:  • Electronic brake systems (EBS).  • Electronically controlled air suspension (ECAS).  • Engine regulation (EDC).  • Retarder.  • Gearbox.  • Air-conditioning systems.  • Central computer.  • Instrumentation.  • Door module.  • Airbag.  • And much more. Possibilities of use:  • Simple testing of actuators.  • Visualisation and assessment of current sensor signals.  • Identification of control unit in assembled condition.  • Depiction of all stored diagnosis entries.  • Fast orientation on vehicle by means of integrated overview wiring diagrams.  • HD-OBD scantool (Heavy Duty On Board Diagnosis), read-out and presentation of data relevant to exhaust gas. Special parameter programming like speed limit allowed. Supported languages.

CNH DIAGNOSTIC KIT (DPA5) ORIGINAL GENUINE

CNH DIAGNOSTIC KIT (DPA5)

http://specdiag.com/cnh-dpa5.html

INCLUDED  • Dearborn Protocol Adapter 5  • 15' USB cable  • 9-pin Deutsch adapter  • CNH Electronic Service Tool 7.4.0.0 (with Diagnostic Procedures)  • USB key DESCRIPTION Electronic Service Tool (EST) - used by dealership technicians to connect with machines that have a Controller Area Network (CAN) BUS as part of the electronic system architecture. With this service tool you can:  • Check status of parameters;  • Retrieve faults;  • Run diagnostic tests;  • Make ECU and parameter programming;  • Monitor active and logged diagnostics;  • View and change ECU configuration;  • View diagnostic procedures and schematics.  • Troubleshoot problems;  • Use asist database;  • Run scope diagnostics; E.A.S.y - additional engine diagnostic and download tool for connection directly to ECU to perform diagnostic, programming and ECU reload by K-Line protocol. CNH Engine Download Tool operates from within the EST program to perform the following engine download operations:  • Provide Engine Control Unit (ECU) programing update capability;  • Provide blank ECU initialization and programming capability;  • Provide ECU programming reassignment for blank and other ECUs;  • Provide ECU download crash recovery. See our Approval Password Generator to program Blank ECU, ECU Reassignment and Download Crash Recovery. Supported brands:  • New Holland (Agriculture and Construction);  • New Holland FK (Fiat-Kobelco);  • New Holland O&K (Orenstein & Koppel);  • CASE (Agriculture and Construction);  • STEYR;  • KOBELCO;  • Iveco (Astra) (articulated dump trucks only);  • Flexi-Coil;  • Sumitomo (S.H.I.);  • Link-Belt. Supported languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch, Danish.