2020-08-06

Liebherr SCULi 2.9.3 [2020]

Liebherr SCULi 2.9.3 [2020]


 Liebherr Diagnostic Software - used to keep maintenance and service tasks on engine and machine controllers.

Software contains:

 • Diagnostics software for various control devices.
 • Central integration system for services.
 • Catalogue of predefined available services.
 • Standard for Liebherr diagnostics systems.
 • Simple and standardized user interface with enhanced functionality.

Software can perform:

 • Program travel, steering, brake / inching pedal and hydraulic components.
 • Read, save, print and delete service codes.
 • Read and change parameters from the travel electronic.

Supported ECUs:

 • LMB (DC4, DC5, UP/CR, Lidec1).
 • PME1 (Master4, UEC3).


Supported languages: English, German, French, Italian, Spanish, Russian.
Posted by Special Diagnostics at 1:35 AM

Bobcat Service Analyzer 88.11 [2020]

 Bobcat Service Analyzer 88.11 [2020]


Service Analyzer - allows communicate with the Electronic Control Modules (ECMs), existing and potential problems to be diagnosed. Connect, monitor and diagnose Loaders, Excavators, Utility Work Machines, VersaHandlers.

Features:

 • Monitor - allows the technician to view certain vital machine sensor values in a digital and bar graph form. The technician is also able to select sensor values to be displayed in a large digital format for easier viewing. The bar graphs change colors depending on current sensor state.

 • Warnings - allows the technician to view Stored Service Codes history, the number of total machine Warning and Shutdowns that have occurred, and adjusting of the Maintenance Clock settings.

 • Diagnostics - allows the ability to monitor display panel operation, drive and workgroup functions, attachment controls and the Radio Remote Control transmitter operation and re-syncing to the receiver. Test lights, controls, panels, buttons, indicators.

 • Install - allows updating of dealer information and adding new kits to the machine that are connected to a controller.

 • Program / Update - allows updating software to select controllers. It also allows entry of machine’s serial number, hours (new controllers only) and enabling / disabling installed Options and Kits.


Posted by Special Diagnostics at 1:34 AM

CNH EST 9.3.0.0 Engineering 2020

CNH EST 9.3

Electronic Service Tool (EST) - used by dealership technicians to connect with machines that have a Controller Area Network (CAN) BUS as part of the electronic system architecture.

With this service tool you can:

 • Check status of parameters;
 • Retrieve faults;
 • Run diagnostic tests;
 • Make ECU and parameter programming;
 • Monitor active and logged diagnostics;
 • View and change ECU configuration;
 • View diagnostic procedures and schematics.
 • Troubleshoot problems;
 • Use asist database;
 • Run scope diagnostics;

E.A.S.y - additional engine diagnostic and download tool for connection directly to ECU to perform diagnostic, programming and ECU reload by K-Line protocol.
CNH Engine Download Tool operates from within the EST program to perform the following engine download operations:

 • Provide Engine Control Unit (ECU) programing update capability;
 • Provide blank ECU initialization and programming capability;
 • Provide ECU programming reassignment for blank and other ECUs;
 • Provide ECU download crash recovery.

See our Approval Password Generator to program Blank ECU, ECU Reassignment and Download Crash Recovery, Speed Limit, Engine Download Request.

Supported brands:

 • CASE (Agriculture and Construction);
 • Flexi-Coil;
 • STEYR;
 • KOBELCO;
 • Miller;
 • New Holland (Agriculture and Construction);

Supported languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch, Danish.

Posted by Special Diagnostics at 1:33 AM

Scania SDP3 2.44

Scania SDP3 2.44.1 [2020-10]


Scania Diagnos & Programmer 3 (SDP3) communicates with Scania vehicles and Scania industrial and marine engines. The program has been developed to support the electrical system with CAN communication. The program is used for troubleshooting, adjusting customer parameters, calibrations, conversions affecting the electrical system and updating software in control units.

Bodywork Interface Configuration Tool (BICT) is a software tool for the Bodywork Interface Configuration (BIC) function. This tool facilitates the connection of bodywork and body using the functions included in the vehicle’s electrical system. The logic programming is done in a BIC project, which in turn can contain several logic diagrams, to make the logic programming clearer. The BIC project can be saved and reused for more vehicles. BICT can be used both with and without connection to the vehicle. Without connection to a vehicle it is possible to create new projects containing logic diagrams and simulate logic diagrams. The BIC project can be saved and later used to write the BIC program to the control unit. With BICT connected to the vehicle it is possible to write a new BIC program to the control unit or update the existing BIC program in the control unit. You can also troubleshoot the BIC program in the control unit via guides in SDP3.


Posted by Special Diagnostics at 1:31 AM
Subscribe to: Posts (Atom)