Scania SDP3 2.63.1
Scania Diagnos & Programmer 3 (SDP3) communicates with Scania
vehicles and Scania industrial and marine engines. The program has been
developed to support the electrical system with CAN communication.
The program is used for troubleshooting, adjusting customer parameters,
calibrations, conversions affecting the electrical system and updating
software in control units.
More Info: https://specdiag.com/scania.html
Cummins INSITE 9.1.0 released
Pro, ZAP-IT, Fleet Counts
https://specdiag.com/index.html
https://specdiag.com/index.html
https://specdiag.com/index.html
InPower Pro 15.0
• Adjustments for trims and settings;
• Monitoring;
• Strip chart;
• Viewing faults;
• Report capability.
This tool also can be used to save device's trims and settings to a
file.
The stored settings can be viewed offline and they can be used to
configure multiple installations of the same application controller
type.
MORE INFO: https://specdiag.com/cummins-index.html
MORE INFO: https://specdiag.com/cummins-index.html
MORE INFO: https://specdiag.com/cummins-index.html
Deutz SerDia 4.0 - v16.1.0
SerDia 4.0 - diagnostic and programming tool used for Deutz controllers.
Supported controllers:
• MD1 (EMR5 DPF, EMR5 SCR, EMR5 V-Engine)
• EMR4 (EDC17 CV52, EDC17 CV52 MSV6/V8, EDC17CV54, EDC17CV56)
• EMR3 (EDC16UC40, EDC7UC31)
• EMR2
• EMR G1 G2
• EDEUTZ PCU
• HD2
• LPG
• EMR L1 (TCD9-18L)
MORE INFO: https://specdiag.com/deutz-index.html
MORE INFO: https://specdiag.com/deutz-index.html
MORE INFO: https://specdiag.com/deutz-index.html
CNH EST 9.11.0.0
More info: https://specdiag.com/cnh.html
More info: https://specdiag.com/cnh.html
More info: https://specdiag.com/cnh.html
Electronic Service Tool (EST) - used by dealership technicians to
connect with machines that have a Controller Area Network (CAN) BUS as
part of the electronic system architecture.
With this service tool you can:
• Check status of parameters;
• Retrieve faults;
• Run diagnostic tests;
• Make ECU and parameter programming;
• Monitor active and logged diagnostics;
• View and change ECU configuration;
• View diagnostic procedures and schematics.
• Troubleshoot problems;
• Use asist database;
• Run scope diagnostics;
E.A.S.y - additional engine diagnostic and download tool for connection directly to ECU to perform diagnostic, programming and ECU reload by K-Line protocol.
CNH Engine Download Tool operates from within the EST program to perform the following engine download operations:
• Provide Engine Control Unit (ECU) programing update capability;
• Provide blank ECU initialization and programming capability;
• Provide ECU programming reassignment for blank and other ECUs;
• Provide ECU download crash recovery.
Supported brands:
• CASE (Agriculture and Construction);
• Flexi-Coil;
• STEYR;
• KOBELCO;
• Miller;
• New Holland (Agriculture and Construction).
eTimGo Offline features:
• Fault Code Resolutions;
• Wiring Schematic;
• Complete Service Manual;
• Installation Instructions;
• Operator's Manual;
• Knowledge Articles;
• Service Bulletin;
• Standard Repair Time.
Supported languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch, Danish.
|
|||
|
|||
• CANfox interface • OBD2 cable • 9-pin cable
• Hatz HDS2 [2024]
CANfox - offers RS232 and an electrically isolated CAN interfaces for mobile use with a laptop or stationary as a desktop device. HDS2 - diagnostic device for electronically controlled Hatz engines. CTPT - programming CAN speed lever. HSP - configuration for Hatz Smart Panel. Predownload Tool - Hatz datasets for offline use. Supported functions: • Identification • Error Memory (trouble codes) • Actuator test • Diagnostic tests • Service • Data set • Engine panel Supported languages: English, German, French, Italian, Spanish, Russian, Danish, Dutch, Polish, Portuguese, Czech. 
 |
MTU DiaSys 2.75 [2024]
DiaSys used to communicate with various MTU controllers, RCS-5 Remote Control Systems and MCS-5 Monitoring and Control Systems.
The main features of the program:
• Controller parameter setting;
• Data recording.
Supported languages: German, English.
MORE INFO:
https://specdiag.com/mtu.html
https://specdiag.com/mtu.html
https://specdiag.com/mtu.html
Iveco CoreXS VCI 4 Actia
http://specdiag.com/iveco-vci.html
http://specdiag.com/iveco-vci.html
http://specdiag.com/iveco-vci.html
The IVECO VCI is compatible with Iveco’s UDT software (Unified Diagnostic Tool) for use with trucks, light-duty, and heavy-duty vehicles.
The Iveco VCI can communicate with different ECUs and perform the following activities:
|
|||
|
|||
• CAN USB Interface • 3-pin cable
• Hyster PC Service Tool 5.3 [2024] • Yale PC Service Tool 5.3 [2024] • Dana Dashboard HYG/NMHG 3.8.4
PC Service Tool is a Windows based service application that is used to communicate with the truck’s internal control systems. It can be used to monitor the status and condition of the various subsystems running within the truck. With this capability, PC Service Tool can be used to monitor component operation, or determine if abnormal events have occurred in the truck, and assist with their diagnosis and correction. PC Service Tool, which accesses the truck’s internal communications network via various CAN adapters. The tool works with the range of Hyster® ICE and Electric Rider trucks. It is also compatible with the newest Electric Warehouse products. Supported languages: English.  |
|
|||
|
|||
• DB to 15-pin cable • USB to Serial RS232 adapter
• PALDIAG [2024]
PALDIAG - configure the settings that will enable you to work best – such as configuration of stability (e.g. ISC, HPSC-Plus LOAD), assistance (e.g. P-Fold) and comfort systems (e.g. AOS, SRC, RTC, Soft Stop, …), definition of load limits and restriction areas, assignment of levers and functions, speed settings, calibration of sensors and telematics module, retrofitting of functions, etc. Supported models: • Paltronic 40 • Paltronic 50 • Paltronic 100 • Paltronic 150 • Paltronic 150 TTC • Paltronic 180 • Paltronic 200 • Palcom P7 • Scnreco P2 • Scnreco P2CO • Scnreco P3 • Scnreco P4 • Hetronic BMS2 • PAD • IFM Supported languages: English, French, German, Italina, Spanish.  |
|
|||
|
|||
• Vehicle Communication Interface • OBD2 cable • USB cable
• Iveco EASy 18.1 (Truck & Bus) [2024]
E.A.SY (Electronic Advanced System) - allows simple diagnosis of the various electronic control units on the vehicle, using a communications module (VCI). E.A.SY. software interface is designed to facilitate access to tools, view functions and make diagnostic procedures clear and adaptable to various needs. The software for the E.A.SY platform provides a single, intuitive interface, through which it is possible to consult a guide to repairs organized by symptom. With this service tool you can: • Make active ECU diagnostic; • Make parameter programming; • Perform engine tests; • View wiring diagrams.
|
SerDia 2000 v1.8.6 LEVEL 5
More Info: http://specdiag.com/deutz-hs-light.html
More Info: http://specdiag.com/deutz-hs-light.html
More Info: http://specdiag.com/deutz-hs-light.html
Weidemann WEDIAS 2.1
More info: http://specdiag.com/weidemann.html
More info: http://specdiag.com/weidemann.html
More info: http://specdiag.com/weidemann.html
Kramer KADIAS 2.0
MORE INFO: http://specdiag.com/kramer.html
MORE INFO: http://specdiag.com/kramer.html
MORE INFO: http://specdiag.com/kramer.html
Iveco EASy 17.1 FPT [2024]
Fiat Power Train, Industrial, Engines
MORE INFO: http://specdiag.com/iveco.html
MORE INFO: http://specdiag.com/iveco.html
Iveco EASy 18.1 Truck & Bus
MORE INFO: http://specdiag.com/iveco.html
MORE INFO: http://specdiag.com/iveco.html
MORE INFO: http://specdiag.com/iveco.html
Scania SDP3 2.60.1
High / Internal (Truck & Bus)
Power Solution Engines (Industry & Marine)
http://specdiag.com/scania.html
http://specdiag.com/scania.html
http://specdiag.com/scania.html
Cummins INSITE 9.0.0
INSITE - electronic service diagnostic program that allows you to
troubleshoot Cummins electronic engines. You can do all what dealers do
with subscriptions included: Basic, Lite, Pro, RSGR (Road Speed
Governor Restricted), Industrial / Power Generation Applications,
OBD-RSGR, OBD, RSGR Plus, Pro Plus, Fleet Calibration Counts, OEM, ECM
Password Removal, ECM Password Removal.
INCAL - DVD which contains the latest revisions of all Cummins ECM Calibrations
MORE INFO: http://specdiag.com/cummins-index.html
MORE INFO: http://specdiag.com/cummins-index.html
MORE INFO: http://specdiag.com/cummins-index.html
Scania SDP3 2.59.1 [2403]
http://specdiag.com/scania.html
http://specdiag.com/scania.html
http://specdiag.com/scania.html
Scania Diagnos & Programmer 3 (SDP3) communicates with Scania
vehicles and Scania industrial and marine engines. The program has been
developed to support the electrical system with CAN communication.
The program is used for troubleshooting, adjusting customer parameters,
calibrations, conversions affecting the electrical system and updating
software in control units.
Bodywork Interface Configuration Tool (BICT) is a software tool
for the Bodywork Interface Configuration (BIC) function.
This tool facilitates the connection of bodywork and body using the
functions included in the vehicle’s electrical system.
The logic programming is done in a BIC project, which in turn can
contain several logic diagrams, to make the logic programming clearer.
The BIC project can be saved and reused for more vehicles. BICT can be
used both with and without connection to the vehicle.
Without connection to a vehicle it is possible to create new projects
containing logic diagrams and simulate logic diagrams.
The BIC project can be saved and later used to write the BIC program to
the control unit.
With BICT connected to the vehicle it is possible to write a new BIC
program to the control unit or update the existing BIC program in the
control unit.
You can also troubleshoot the BIC program in the control unit via guides
in SDP3.
VCI2 VCI3
http://specdiag.com/scania.html
http://specdiag.com/scania.html
http://specdiag.com/scania.html
Iveco EASy 18.1 (Truck & Bus) [2024]
E.A.SY (Electronic Advanced System) - allows simple diagnosis of the various electronic control units on the vehicle, using a communications module (ECI).
E.A.SY. software interface is designed to facilitate access to
tools, view functions and make diagnostic procedures clear and adaptable
to various needs.
The software for the E.A.SY platform provides a single, intuitive
interface, through which it is possible to consult a guide to repairs
organised by symptom.
With this service tool you can:
• Make active ECU diagnostic;
• Make parameter programming;
• Perform engine tests;
• View wiring diagrams.
http://specdiag.com/iveco.html
http://specdiag.com/iveco.html
http://specdiag.com/iveco.html
|
|||
|
|||
• D-Tech Interface • 2 x 4-pin to OBD2 cable (4 x CAN) • 2 x 4-pin to 19-pin SerDia cable (4 x CAN) • 4-pin to 14-pin CAN cable • DB9 to 14-pin K-Line EMR 2/3 cable • DB9 to 14-pin K-Line InfoCenter cable • DB9 to 14-pin K-Line cable
• SDF D-Tech 1.0
D-TECH is genuine SDF dealer interface with support of 4 x CAN and K/L-Line protocols. Fully compatible with D-Tech diagnostic software and provides monitoring and diagnostics functions for SDF production machinery. Supported brands: • Same • Deutz-Fahr • Lamborghini Trattori • Hurlimann Supported languages: English. 
|
WEDIAS - service tool makes it possible to access all electronic control units on the vehicle.
MORE INFO: http://specdiag.com/weidemann.html
Supported functions:
• Error Memory (trouble codes)
• Functional Diagnostic
• Configuration
• Programming (ECU,indicating instrument)
• Maintenance (service, service counter reset)
• Documentation
• PRO (factory settings, operation hours counter reset)
Supported models:
WHEELLOADER:
• RL20E
• RL20e Li-ion
• RL28
• RL28e
• RL30
• RL30 (T5)
• 2070 CX
• RL40
• RL50
• RL60
• RL70
• RL60/70/1 T4F
• RL60/2 T5
• RL70/2 T5
• RL90
TELEHANDLER:
• TL41 (T5)
• TL41e
• TL41e Ke
• TL48
• TL48 2.0
• TL48 2.0 (T5)
• TL6025
• TL6027
• 420-00/01
Supported languages: English, French, German.
MORE INFO: http://specdiag.com/weidemann.html
|
|||
|
|||
• CANfox interface
• WEDIAS 2.4 [2024]
CANfox - offers RS232 and an electrically isolated CAN interfaces for mobile use with a laptop or stationary as a desktop device. WEDIAS - service tool makes it possible to access all electronic control units on the vehicle. Supported functions: • Error Memory (trouble codes) • Functional Diagnostic • Configuration • Programming (ECU,indicating instrument) • Maintenance (service, service counter reset) • Documentation • PRO (factory settings, operation hours counter reset) Supported models: WHEELLOADER: • RL20E • RL20e Li-ion • RL28 • RL28e • RL30 • RL30 (T5) • 2070 CX • RL40 • RL50 • RL60 • RL70 • RL60/70/1 T4F • RL60/2 T5 • RL70/2 T5 • RL90 TELEHANDLER: • TL41 (T5) • TL41e • TL41e Ke • TL48 • TL48 2.0 • TL48 2.0 (T5) • TL6025 • TL6027 • 420-00/01 Supported languages: English, French, German. 
 |
