http://specdiag.com/detroit.html
http://specdiag.com/dgtech-dpa5.html
http://specdiag.com/nexiq-usb-link.html
• Detroit Diesel Diagnostic Link (DDDL) 6.47
• Detroit Diesel Diagnostic Link (DDDL) 7.08
• Detroit Diesel Calibration Tool (DDCT) 4.5
• DDEC Reprogramming System (DRS) 6.20
• Detroit Diesel Reprogramming System (DDRS) 7.07
• Detroit Diesel Drumroll Engineering (DDDE) 7.08
• Detroit Engineer Tool (DET) 7.08
Detroit Diesel Calibration Tool (DDCT):
• View and edit the control parameters in the ECM to optimize the control logic;
• View instrumentation variables, such as rpm or fluid temperatures and pressures;
• Use meta files (.MET), use and edit calibration files (.CAL).
DDEC Reprogramming System (DRS):
• Reprogram an ECM connected to the PC using a new calibration;
• Reprogram an ECM connected to the PC using a Fleet calibration (DDEC III/IV only);
• Update the software in the ECM connected to the PC (DDEC III/IV only);
• View and edit a wide range of customer calibrations;
• View and edit the injector settings (DDEC III/IV only);
• View and edit (DDEC III/IV only) the engine accumulators;
• View the trip accumulators;
• View engine configuration information;
• Extract calibrations from the ECM connected to the PC.
Detroit Diesel Reprogramming System (DDRS) – can be used only on DDEC VI system:
• View information about the connected ECUs;
• Perform standard fault code operations;
• Perform traditional and advanced troubleshooting;
• Read variable values in real time and display them graphically;
• Configure and manage parameters;
• Perform service routines;
• Play back logs of all connected activity;
• Program the CPC/MCM (EPA07) and CPC02T/MCM2/ACM2 (EPA10).
Detroit Diesel Drumroll Engineering (DDDE) – same functionality as DDRS with additional flash and application status functions.
Detroit Engineer Tool (DET) – tool will allow DDRS or DDDE to be activated off-line and change product level.
http://specdiag.com/detroit.html
http://specdiag.com/dgtech-dpa5.html
http://specdiag.com/nexiq-usb-link.html
